Why Your Soy Candle Is Frosting: Causes & Simple Fixes
Frosting, that dusty, white crystalline layer that appears on soy candles, is one of the most common concerns for beginner…
Frosting, that dusty, white crystalline layer that appears on soy candles, is one of the most common concerns for beginner…
Choosing the right wick is essential for creating beautiful, evenly burning soy candles. The wrong wick can cause tunneling, mushrooming,…
Adding the right amount of fragrance oil (FO) is one of the most important steps in candle making. Too little,…
Choosing the right wax is one of the most important steps for beginners in candle making. The type of wax…
Candle making is an art that brings warmth and creativity into your home. Using decor mold candle molds, you can…
Candle making is both an art and a science, and choosing the right candle wick is crucial for creating the…
Candles have been a source of light, warmth, and ambiance for centuries. In today’s world, where sustainability is at the…
Whether you’re a seasoned candle maker or a newcomer to the aromatic world, understanding the differences between essential oils and…
Crafting the perfect whipped soap involves more than just the ingredients; it requires an understanding of how to blend fragrance…
Turning your candle-making hobby into a flourishing business can seem daunting, but with the right tools and knowledge, it’s entirely…
End of content
End of content
| Wick Styles |
|---|
| CD-10, CD-12, CD-14, CD-16, CD-18, CD-2, CD-20, CD-22, CD-3, CD-4, CD-5, CD-6, CD-7, CD-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Cotton | 3.00 | 1.60 | 4.30 |
| 28-24 Cotton | 2.90 | 1.50 | 4.40 |
| 28-24 Spec. Cotton | 2.60 | 1.40 | 3.90 |
| 34-24 Cotton | 3.50 | 2.30 | 4.60 |
| 34-40 Reg. Cotton | 4.10 | 2.50 | 4.70 |
| 34-40 Spec. Cotton | 4.60 | 3.00 | 5.10 |
| 36-24 Cotton | 3.70 | 2.30 | 4.40 |
| 36-24-24 Cotton | 4.80 | 2.90 | 4.90 |
| 44-20-18 Cotton | 5.20 | 3.30 | 5.20 |
| 44-24-18 Cotton | 5.70 | 3.60 | 5.20 |
| 44-28-18 Cotton | 6.10 | 3.80 | 6.00 |
| 44-32-18 Cotton | 6.40 | 3.80 | 5.90 |
| 51-32-18 Cotton | 6.80 | 4.10 | 5.80 |
| 60-44-18 Cotton | 8.20 | 5.10 | 6.20 |
| 62-52-18 Cotton | 8.20 | 4.60 | 5.70 |
| S-330 Cotton3.90 | 2.10 | 4.30 |
| Wick Styles |
|---|
| ECO 0.5, ECO-1, ECO-10, ECO-12, ECO-14, ECO-2, ECO-4, ECO-6, ECO-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 12 ply | 4.30 | 2.90 | 4.60 |
| 15 ply | 5.10 | 3.20 | 4.90 |
| 18 ply | 5.10 | 3.10 | 4.90 |
| 21 ply | 5.20 | 3.40 | 4.70 |
| 24ply | 5.70 | 3.70 | 5.10 |
| 27 ply | 6.20 | 4.30 | 5.50 |
| 30 ply | 6.30 | 4.10 | 5.40 |
| 36 ply | 7.00 | 4.50 | 5.70 |
| 45 ply | 7.80 | 4.90 | 6.20 |
| 60 ply | 7.40 | 4.40 | 5.90 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| HTP-104 | 7.50 | 5.10 | 5.40 |
| HTP-105 | 7.50 | 5.40 | 6.20 |
| HTP-1212 | 8.60 | 5.90 | 6.40 |
| HTP-31 | 4.50 | 3.30 | 4.50 |
| HTP-41 | 4.70 | 3.60 | 4.70 |
| HTP-52 | 0.00 | 0.00 | 0.00 |
| HTP-62 | 5.40 | 3.50 | 5.00 |
| HTP-73 | 6.50 | 5.30 | 5.20 |
| HTP-83 | 7.00 | 3.80 | 5.50 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| LX-10 | 1560 | 0 |
| LX-12 | 1302 | 0 |
| LX-14 | 1104 | 0 |
| LX-16 | 970 | 0 |
| LX-18 | 890 | 0 |
| LX-20 | 810 | 0 |
| LX-22 | 0 | 108 |
| LX-24 NST 2 | 0 | 99 |
| LX-26 NST | 0 | 92 |
| LX-28 NST 2 | 0 | 84 |
| LX-30 NST 2 | 0 | 79 |
| LX-8 | 1720 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Paper | 0.12 | 2.10 | 4.50 |
| 34-40 Reg. Paper | 0.11 | 2.10 | 4.30 |
| 34-40 Spec. Paper | 0.16 | 2.80 | 4.80 |
| 36-24-24 Paper | 0.17 | 2.40 | 4.80 |
| 44-20-18 Paper | 0.18 | 4.90 | 5.90 |
| 44-24-18 Paper | 0.19 | 3.50 | 5.20 |
| 44-28-18 Paper | 0.19 | 4.60 | 5.00 |
| 44-32-18 Paper | 0.23 | 3.90 | 6.10 |
| 51-32-18 Paper | 0.22 | 3.70 | 5.60 |
| 60-44-18 Paper | 0.31 | 5.20 | 5.70 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| RRD 29 NST 2 | 1105 | 0 |
| RRD 34 NST 2 | 943 | 0 |
| RRD 37 NST 2 | 876 | 0 |
| RRD 40 NST 2 | 715 | 0 |
| RRD 47 NST 2 | 694 | 0 |
| RRD 50 NST 2 | 0 | 0 |
| RRD 55 NST 2 | 0 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| # 1 | 7.30 | 4.40 | 6.00 |
| # 2 | 7.50 | 4.50 | 6.00 |
| # 3 | 8.10 | 4.90 | 6.00 |
| # 4 | 8.80 | 6.20 | 6.20 |
| # 5 | 10.00 | 7.00 | 5.50 |
| # 6 | 10.30 | 7.10 | 5.50 |
| 1/0 | 7.00 | 4.60 | 5.60 |
| 2/0 | 6.00 | 3.90 | 5.20 |
| 3/0 | 6.10 | 3.60 | 5.00 |
| 4/0 | 5.50 | 3.40 | 4.90 |
| 5/0 | 4.90 | 2.80 | 4.50 |
| 6/0 | 4.60 | 2.80 | 4.60 |
| TL 10/S-32 NST 2 | 0 | 0 |
| TL 13/S-32 NST 2 | 0 | 0 |
| TL 15/S-30 NST 2 | 2030 | 0 |
| TL 18/S-30 NST 2 | 1635 | 0 |
| TL 21/S-30 NST 2 | 1360 | 0 |
| TL 25/S-30 C | 1180 | 0 |
| TL 28/S-28 C | 1030 | 0 |
| TL 31/S-28 C | 890 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Zinc | 2.20 | 0.80 | 3.60 |
| 28-24 Spec. Zinc | 1.70 | 0.90 | 3.80 |
| 28-24 Zinc | 1.70 | 0.80 | 3.90 |
| 34-24 Zinc | 2.10 | 1.30 | 3.50 |
| 34-40 Reg. Zinc | 2.30 | 1.30 | 4.60 |
| 34-40 Spec. Zinc | 2.70 | 1.50 | 4.60 |
| 36-24 Zinc | 2.20 | 1.40 | 4.40 |
| 36-24-24 Zinc | 3.10 | 1.80 | 4.90 |
| 44-20-18 Zinc | 3.20 | 1.90 | 4.90 |
| 44-24-18 Zinc | 4.30 | 2.50 | 5.20 |
| 44-28-18 Zinc | 5.00 | 3.00 | 5.40 |
| 44-32-18 Zinc | 5.00 | 2.70 | 5.40 |
| 44-36-18 Zinc | 0.00 | 0.00 | 0.00 |
| 51-32-18 Zinc | 5.00 | 2.80 | 5.20 |
| 60-44-18 Zinc | 6.60 | 4.20 | 5.90 |
| 62-52-18 Zinc | 7.20 | 4.50 | 5.80 |
| High Neck 15 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| High Neck 20 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| No Tab |
|---|
| Build your own wick assemblies without a sustainer base. |
| No Tab |
| Self Centering 33 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 15 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 20 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Beeswax Coating |
|---|
| This 100% Yellow Beeswax coating is great coating for not only beeswax candles but also all of your natural based candles. |
| 160 Degrees Fahrenheit Melt Point |
| High Melt Point Wax Coating |
|---|
| This wax coating is for applications with above average pouring processes in containers and votives. This coating adds very good rigidity but maintains the durability of the wick. |
| 184 Degrees Fahrenheit Melt Point |
| Standard Wax Coating |
|---|
| This is the standard wick coating wax and is good for coating standard zinc cored wicks in hot pouring processes for containers and votives. |
| 160 Degrees Fahrenheit Melt Point |
| Super High Melt Point Wax Coating |
|---|
| This is a specially formulated wax coating that is a must for pouring gel candles. The extra high melt point enables the wick to maintain its rigidity at the elevated pouring temperatures and prevents the wax from melting off the wick into your gel. The high melt point of this coating can affect the burning characteristics of the wick. |
| 210 Degrees Fahrenheit Melt Point |