Best Wax for Beginners: Soy vs Paraffin
Choosing the right wax is one of the most important steps for beginners in candle making. The type of wax…
Choosing the right wax is one of the most important steps for beginners in candle making. The type of wax…
Candles have been a source of light, warmth, and ambiance for centuries. In today’s world, where sustainability is at the…
Creating the perfect candle involves more than just choosing a pleasant scent. For many crafters, the art of mixing different…
Candle making is both an art and a science, requiring precision and patience. One of the most crucial aspects of…
Candle-making enthusiasts often find themselves torn between two popular waxes: beeswax and soy wax. Both have unique properties that make…
In a world of natural wax alternatives, paraffin wax continues to hold its place as one of the most reliable,…
Choosing the right candle wax is one of the most important steps in making candles, whether you’re a beginner crafting…
When it comes to candle making, one of the first and most important choices you’ll make is the type of…
A Complete Guide for Candle Makers and DIY Enthusiasts Whether you’re a seasoned candle maker or just starting out, finding…
In the dynamic world of candle making, the choice of wax can significantly impact the quality, appeal, and marketability of…
End of content
End of content
| Wick Styles |
|---|
| CD-10, CD-12, CD-14, CD-16, CD-18, CD-2, CD-20, CD-22, CD-3, CD-4, CD-5, CD-6, CD-7, CD-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Cotton | 3.00 | 1.60 | 4.30 |
| 28-24 Cotton | 2.90 | 1.50 | 4.40 |
| 28-24 Spec. Cotton | 2.60 | 1.40 | 3.90 |
| 34-24 Cotton | 3.50 | 2.30 | 4.60 |
| 34-40 Reg. Cotton | 4.10 | 2.50 | 4.70 |
| 34-40 Spec. Cotton | 4.60 | 3.00 | 5.10 |
| 36-24 Cotton | 3.70 | 2.30 | 4.40 |
| 36-24-24 Cotton | 4.80 | 2.90 | 4.90 |
| 44-20-18 Cotton | 5.20 | 3.30 | 5.20 |
| 44-24-18 Cotton | 5.70 | 3.60 | 5.20 |
| 44-28-18 Cotton | 6.10 | 3.80 | 6.00 |
| 44-32-18 Cotton | 6.40 | 3.80 | 5.90 |
| 51-32-18 Cotton | 6.80 | 4.10 | 5.80 |
| 60-44-18 Cotton | 8.20 | 5.10 | 6.20 |
| 62-52-18 Cotton | 8.20 | 4.60 | 5.70 |
| S-330 Cotton3.90 | 2.10 | 4.30 |
| Wick Styles |
|---|
| ECO 0.5, ECO-1, ECO-10, ECO-12, ECO-14, ECO-2, ECO-4, ECO-6, ECO-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 12 ply | 4.30 | 2.90 | 4.60 |
| 15 ply | 5.10 | 3.20 | 4.90 |
| 18 ply | 5.10 | 3.10 | 4.90 |
| 21 ply | 5.20 | 3.40 | 4.70 |
| 24ply | 5.70 | 3.70 | 5.10 |
| 27 ply | 6.20 | 4.30 | 5.50 |
| 30 ply | 6.30 | 4.10 | 5.40 |
| 36 ply | 7.00 | 4.50 | 5.70 |
| 45 ply | 7.80 | 4.90 | 6.20 |
| 60 ply | 7.40 | 4.40 | 5.90 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| HTP-104 | 7.50 | 5.10 | 5.40 |
| HTP-105 | 7.50 | 5.40 | 6.20 |
| HTP-1212 | 8.60 | 5.90 | 6.40 |
| HTP-31 | 4.50 | 3.30 | 4.50 |
| HTP-41 | 4.70 | 3.60 | 4.70 |
| HTP-52 | 0.00 | 0.00 | 0.00 |
| HTP-62 | 5.40 | 3.50 | 5.00 |
| HTP-73 | 6.50 | 5.30 | 5.20 |
| HTP-83 | 7.00 | 3.80 | 5.50 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| LX-10 | 1560 | 0 |
| LX-12 | 1302 | 0 |
| LX-14 | 1104 | 0 |
| LX-16 | 970 | 0 |
| LX-18 | 890 | 0 |
| LX-20 | 810 | 0 |
| LX-22 | 0 | 108 |
| LX-24 NST 2 | 0 | 99 |
| LX-26 NST | 0 | 92 |
| LX-28 NST 2 | 0 | 84 |
| LX-30 NST 2 | 0 | 79 |
| LX-8 | 1720 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Paper | 0.12 | 2.10 | 4.50 |
| 34-40 Reg. Paper | 0.11 | 2.10 | 4.30 |
| 34-40 Spec. Paper | 0.16 | 2.80 | 4.80 |
| 36-24-24 Paper | 0.17 | 2.40 | 4.80 |
| 44-20-18 Paper | 0.18 | 4.90 | 5.90 |
| 44-24-18 Paper | 0.19 | 3.50 | 5.20 |
| 44-28-18 Paper | 0.19 | 4.60 | 5.00 |
| 44-32-18 Paper | 0.23 | 3.90 | 6.10 |
| 51-32-18 Paper | 0.22 | 3.70 | 5.60 |
| 60-44-18 Paper | 0.31 | 5.20 | 5.70 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| RRD 29 NST 2 | 1105 | 0 |
| RRD 34 NST 2 | 943 | 0 |
| RRD 37 NST 2 | 876 | 0 |
| RRD 40 NST 2 | 715 | 0 |
| RRD 47 NST 2 | 694 | 0 |
| RRD 50 NST 2 | 0 | 0 |
| RRD 55 NST 2 | 0 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| # 1 | 7.30 | 4.40 | 6.00 |
| # 2 | 7.50 | 4.50 | 6.00 |
| # 3 | 8.10 | 4.90 | 6.00 |
| # 4 | 8.80 | 6.20 | 6.20 |
| # 5 | 10.00 | 7.00 | 5.50 |
| # 6 | 10.30 | 7.10 | 5.50 |
| 1/0 | 7.00 | 4.60 | 5.60 |
| 2/0 | 6.00 | 3.90 | 5.20 |
| 3/0 | 6.10 | 3.60 | 5.00 |
| 4/0 | 5.50 | 3.40 | 4.90 |
| 5/0 | 4.90 | 2.80 | 4.50 |
| 6/0 | 4.60 | 2.80 | 4.60 |
| TL 10/S-32 NST 2 | 0 | 0 |
| TL 13/S-32 NST 2 | 0 | 0 |
| TL 15/S-30 NST 2 | 2030 | 0 |
| TL 18/S-30 NST 2 | 1635 | 0 |
| TL 21/S-30 NST 2 | 1360 | 0 |
| TL 25/S-30 C | 1180 | 0 |
| TL 28/S-28 C | 1030 | 0 |
| TL 31/S-28 C | 890 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Zinc | 2.20 | 0.80 | 3.60 |
| 28-24 Spec. Zinc | 1.70 | 0.90 | 3.80 |
| 28-24 Zinc | 1.70 | 0.80 | 3.90 |
| 34-24 Zinc | 2.10 | 1.30 | 3.50 |
| 34-40 Reg. Zinc | 2.30 | 1.30 | 4.60 |
| 34-40 Spec. Zinc | 2.70 | 1.50 | 4.60 |
| 36-24 Zinc | 2.20 | 1.40 | 4.40 |
| 36-24-24 Zinc | 3.10 | 1.80 | 4.90 |
| 44-20-18 Zinc | 3.20 | 1.90 | 4.90 |
| 44-24-18 Zinc | 4.30 | 2.50 | 5.20 |
| 44-28-18 Zinc | 5.00 | 3.00 | 5.40 |
| 44-32-18 Zinc | 5.00 | 2.70 | 5.40 |
| 44-36-18 Zinc | 0.00 | 0.00 | 0.00 |
| 51-32-18 Zinc | 5.00 | 2.80 | 5.20 |
| 60-44-18 Zinc | 6.60 | 4.20 | 5.90 |
| 62-52-18 Zinc | 7.20 | 4.50 | 5.80 |
| High Neck 15 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| High Neck 20 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| No Tab |
|---|
| Build your own wick assemblies without a sustainer base. |
| No Tab |
| Self Centering 33 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 15 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 20 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Beeswax Coating |
|---|
| This 100% Yellow Beeswax coating is great coating for not only beeswax candles but also all of your natural based candles. |
| 160 Degrees Fahrenheit Melt Point |
| High Melt Point Wax Coating |
|---|
| This wax coating is for applications with above average pouring processes in containers and votives. This coating adds very good rigidity but maintains the durability of the wick. |
| 184 Degrees Fahrenheit Melt Point |
| Standard Wax Coating |
|---|
| This is the standard wick coating wax and is good for coating standard zinc cored wicks in hot pouring processes for containers and votives. |
| 160 Degrees Fahrenheit Melt Point |
| Super High Melt Point Wax Coating |
|---|
| This is a specially formulated wax coating that is a must for pouring gel candles. The extra high melt point enables the wick to maintain its rigidity at the elevated pouring temperatures and prevents the wax from melting off the wick into your gel. The high melt point of this coating can affect the burning characteristics of the wick. |
| 210 Degrees Fahrenheit Melt Point |