Elevate Your Candles: Creative Candle Molds & Melt Molds to Try
Are you ready to take your candle-making skills to the next level? Whether you’re a seasoned artisan or just starting,…
Are you ready to take your candle-making skills to the next level? Whether you’re a seasoned artisan or just starting,…
So, you’ve decided to delve into the wondrous, fragrant, occasionally messy, but always fulfilling universe of candle making. Welcome, brave…
In the world of candles, the wax used is more than just a fuel. It’s an essential element that determines…
If you’ve ever dreamed of creating your own, personalized soaps, you’ve come to the right place! With a little creativity,…
Candles have a special place in our hearts and homes. From setting a calming atmosphere for a relaxing bath, lighting…
Summertime is a season of warmth, long days, and vibrant energy. Yet, when the sun goes down, we often find…
Summer is here, and what could be better than immersing yourself in the delightful world of candle and soap making?…
Introduction Juneteenth is a special occasion that deserves meaningful commemoration. It’s a day to reflect on our shared history, acknowledge…
Whether you’re a candle lover, hobbyist, or entrepreneur, understanding the importance of candle jars is key to fully appreciating the…
Can you smell it? That’s the captivating aroma of scented candles wafting through. It’s an olfactory orchestra that can transport…
End of content
End of content
| Wick Styles |
|---|
| CD-10, CD-12, CD-14, CD-16, CD-18, CD-2, CD-20, CD-22, CD-3, CD-4, CD-5, CD-6, CD-7, CD-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Cotton | 3.00 | 1.60 | 4.30 |
| 28-24 Cotton | 2.90 | 1.50 | 4.40 |
| 28-24 Spec. Cotton | 2.60 | 1.40 | 3.90 |
| 34-24 Cotton | 3.50 | 2.30 | 4.60 |
| 34-40 Reg. Cotton | 4.10 | 2.50 | 4.70 |
| 34-40 Spec. Cotton | 4.60 | 3.00 | 5.10 |
| 36-24 Cotton | 3.70 | 2.30 | 4.40 |
| 36-24-24 Cotton | 4.80 | 2.90 | 4.90 |
| 44-20-18 Cotton | 5.20 | 3.30 | 5.20 |
| 44-24-18 Cotton | 5.70 | 3.60 | 5.20 |
| 44-28-18 Cotton | 6.10 | 3.80 | 6.00 |
| 44-32-18 Cotton | 6.40 | 3.80 | 5.90 |
| 51-32-18 Cotton | 6.80 | 4.10 | 5.80 |
| 60-44-18 Cotton | 8.20 | 5.10 | 6.20 |
| 62-52-18 Cotton | 8.20 | 4.60 | 5.70 |
| S-330 Cotton3.90 | 2.10 | 4.30 |
| Wick Styles |
|---|
| ECO 0.5, ECO-1, ECO-10, ECO-12, ECO-14, ECO-2, ECO-4, ECO-6, ECO-8 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 12 ply | 4.30 | 2.90 | 4.60 |
| 15 ply | 5.10 | 3.20 | 4.90 |
| 18 ply | 5.10 | 3.10 | 4.90 |
| 21 ply | 5.20 | 3.40 | 4.70 |
| 24ply | 5.70 | 3.70 | 5.10 |
| 27 ply | 6.20 | 4.30 | 5.50 |
| 30 ply | 6.30 | 4.10 | 5.40 |
| 36 ply | 7.00 | 4.50 | 5.70 |
| 45 ply | 7.80 | 4.90 | 6.20 |
| 60 ply | 7.40 | 4.40 | 5.90 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| HTP-104 | 7.50 | 5.10 | 5.40 |
| HTP-105 | 7.50 | 5.40 | 6.20 |
| HTP-1212 | 8.60 | 5.90 | 6.40 |
| HTP-31 | 4.50 | 3.30 | 4.50 |
| HTP-41 | 4.70 | 3.60 | 4.70 |
| HTP-52 | 0.00 | 0.00 | 0.00 |
| HTP-62 | 5.40 | 3.50 | 5.00 |
| HTP-73 | 6.50 | 5.30 | 5.20 |
| HTP-83 | 7.00 | 3.80 | 5.50 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| LX-10 | 1560 | 0 |
| LX-12 | 1302 | 0 |
| LX-14 | 1104 | 0 |
| LX-16 | 970 | 0 |
| LX-18 | 890 | 0 |
| LX-20 | 810 | 0 |
| LX-22 | 0 | 108 |
| LX-24 NST 2 | 0 | 99 |
| LX-26 NST | 0 | 92 |
| LX-28 NST 2 | 0 | 84 |
| LX-30 NST 2 | 0 | 79 |
| LX-8 | 1720 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Paper | 0.12 | 2.10 | 4.50 |
| 34-40 Reg. Paper | 0.11 | 2.10 | 4.30 |
| 34-40 Spec. Paper | 0.16 | 2.80 | 4.80 |
| 36-24-24 Paper | 0.17 | 2.40 | 4.80 |
| 44-20-18 Paper | 0.18 | 4.90 | 5.90 |
| 44-24-18 Paper | 0.19 | 3.50 | 5.20 |
| 44-28-18 Paper | 0.19 | 4.60 | 5.00 |
| 44-32-18 Paper | 0.23 | 3.90 | 6.10 |
| 51-32-18 Paper | 0.22 | 3.70 | 5.60 |
| 60-44-18 Paper | 0.31 | 5.20 | 5.70 |
| Wick Model | Yield m/Kg | Yield yds/lb |
|---|---|---|
| RRD 29 NST 2 | 1105 | 0 |
| RRD 34 NST 2 | 943 | 0 |
| RRD 37 NST 2 | 876 | 0 |
| RRD 40 NST 2 | 715 | 0 |
| RRD 47 NST 2 | 694 | 0 |
| RRD 50 NST 2 | 0 | 0 |
| RRD 55 NST 2 | 0 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| # 1 | 7.30 | 4.40 | 6.00 |
| # 2 | 7.50 | 4.50 | 6.00 |
| # 3 | 8.10 | 4.90 | 6.00 |
| # 4 | 8.80 | 6.20 | 6.20 |
| # 5 | 10.00 | 7.00 | 5.50 |
| # 6 | 10.30 | 7.10 | 5.50 |
| 1/0 | 7.00 | 4.60 | 5.60 |
| 2/0 | 6.00 | 3.90 | 5.20 |
| 3/0 | 6.10 | 3.60 | 5.00 |
| 4/0 | 5.50 | 3.40 | 4.90 |
| 5/0 | 4.90 | 2.80 | 4.50 |
| 6/0 | 4.60 | 2.80 | 4.60 |
| TL 10/S-32 NST 2 | 0 | 0 |
| TL 13/S-32 NST 2 | 0 | 0 |
| TL 15/S-30 NST 2 | 2030 | 0 |
| TL 18/S-30 NST 2 | 1635 | 0 |
| TL 21/S-30 NST 2 | 1360 | 0 |
| TL 25/S-30 C | 1180 | 0 |
| TL 28/S-28 C | 1030 | 0 |
| TL 31/S-28 C | 890 | 0 |
| Wick Model | Burn Rate | Flame Height | Pool Diameter |
|---|---|---|---|
| 10-38 Zinc | 2.20 | 0.80 | 3.60 |
| 28-24 Spec. Zinc | 1.70 | 0.90 | 3.80 |
| 28-24 Zinc | 1.70 | 0.80 | 3.90 |
| 34-24 Zinc | 2.10 | 1.30 | 3.50 |
| 34-40 Reg. Zinc | 2.30 | 1.30 | 4.60 |
| 34-40 Spec. Zinc | 2.70 | 1.50 | 4.60 |
| 36-24 Zinc | 2.20 | 1.40 | 4.40 |
| 36-24-24 Zinc | 3.10 | 1.80 | 4.90 |
| 44-20-18 Zinc | 3.20 | 1.90 | 4.90 |
| 44-24-18 Zinc | 4.30 | 2.50 | 5.20 |
| 44-28-18 Zinc | 5.00 | 3.00 | 5.40 |
| 44-32-18 Zinc | 5.00 | 2.70 | 5.40 |
| 44-36-18 Zinc | 0.00 | 0.00 | 0.00 |
| 51-32-18 Zinc | 5.00 | 2.80 | 5.20 |
| 60-44-18 Zinc | 6.60 | 4.20 | 5.90 |
| 62-52-18 Zinc | 7.20 | 4.50 | 5.80 |
| High Neck 15 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| High Neck 20 MM Base 6 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| No Tab |
|---|
| Build your own wick assemblies without a sustainer base. |
| No Tab |
| Self Centering 33 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 15 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Metal wick sustainer bases manufactured from heavy tinplate. Sold by the pound. |
| Standard 20 MM Base 3 MM Neck |
|---|
| Build your own wick assemblies using this sustainer base. They are used to hold wicks in containers or molds which do not have a hole for insertion and hold wick in an upright position when wax gets close to bottom of container. To use, place wick in center hole of wick sustainer base and squeeze shut to secure wick. Then place in mold for pouring. |
| Beeswax Coating |
|---|
| This 100% Yellow Beeswax coating is great coating for not only beeswax candles but also all of your natural based candles. |
| 160 Degrees Fahrenheit Melt Point |
| High Melt Point Wax Coating |
|---|
| This wax coating is for applications with above average pouring processes in containers and votives. This coating adds very good rigidity but maintains the durability of the wick. |
| 184 Degrees Fahrenheit Melt Point |
| Standard Wax Coating |
|---|
| This is the standard wick coating wax and is good for coating standard zinc cored wicks in hot pouring processes for containers and votives. |
| 160 Degrees Fahrenheit Melt Point |
| Super High Melt Point Wax Coating |
|---|
| This is a specially formulated wax coating that is a must for pouring gel candles. The extra high melt point enables the wick to maintain its rigidity at the elevated pouring temperatures and prevents the wax from melting off the wick into your gel. The high melt point of this coating can affect the burning characteristics of the wick. |
| 210 Degrees Fahrenheit Melt Point |